Company News
Expand category
Close category

Safety knowledge: Do you really understand gas pressure reducing valves?

2023-11-15 15:29:35

The gas pressure reducing valve is an important gas equipment for household gas appliances that connects the angle valve and rubber tube installed on the angle valve of liquefied gas cylinders, reducing output pressure and stabilizing output pressure. It has the advantages of simple structure, stable pressure, light weight, and convenient adjustment and installation. Mainly composed of air inlet, exhaust outlet, handwheel, upper valve, lower valve, inlet, breathing hole, upper chamber, pressure reducing chamber, valve pad, lever, rubber film, spring, adjustment plug, etc.

By introducing the working principle, installation management, and fault analysis and handling of gas pressure reducing valves, we guide users to use gas pressure reducing valves correctly, improve safety awareness, and prevent gas accidents.

Gas leakage accidents occur frequently among residential users, posing a serious threat to the safety of people's lives and property. However, excluding users' insufficient knowledge of gas appliances and analyzing the truth of the accident, the correct use of pressure reducing valves has not yet received high attention, which is also an important reason. According to statistics, 80% of natural gas accidents are caused by the quality of the pressure reducing valve itself and improper use by users.

Working principle of gas pressure reducing valve

When liquefied petroleum gas comes out of a steel cylinder, in order to high-pressure gas, it first enters the pressure reducing chamber through the suction pipeline. When the user closes the switch of the gas appliance, the amount of liquefied petroleum gas entering the pressure reducing chamber increases, and the pressure increases. The top of the rubber film pressed by the spring is lifted, and some of the air stored in the upper chamber is discharged from the valve body through the breathing hole. This will cause the lever to move upwards, using the lever to close the valve inlet and cut off the passage to the liquefied petroleum gas inlet. The pressure at the outlet of the pressure reducing valve will no longer rise. After turning on the switch of the gas appliance, liquefied petroleum gas will flow out of the pressure reducing valve, reducing the pressure in the pressure reducing chamber. The rubber film will be recessed below, causing the lever to lower downwards. External air will enter the upper steam chamber through the breathing hole, causing the valve seat cushion to move upwards. The air inlet will increase, the air inlet will increase, and the pressure will increase. This repeated adjustment process always keeps the pressure in the pressure reducing chamber unchanged. That is to say, regardless of whether the intake pressure is high or low, the outlet pressure is always stable, serving as a depressurization and stabilizer.

Basic performance of gas pressure reducing valve

(1) Pressure regulation range: The adjustable range of the output pressure P2 of the pressure safety valve, within which the specified accuracy must be achieved. The pressure adjustment range is mainly related to the stiffness of the pressure adjustment spring.

(2) Pressure characteristic: The characteristic of input pressure fluctuation leading to output pressure fluctuation when the flow rate G is a value. The smaller the fluctuation of output pressure, the better the characteristics of the pressure reducing valve. The output pressure must be lower than the input pressure. The value basically does not change with input pressure.

(3) Flow characteristics: The characteristics of input pressure timing and output pressure changing with the change of output flow G. When the flow rate G changes, the smaller the change in output pressure, the better. Generally, the lower the output pressure, the smaller the fluctuation as the output flow changes.

Installation and maintenance of gas pressure reducing valve

When users use gas stoves, the pressure reducing valve must be frequently disassembled. The correct and safe connection (installation) between the pressure reducing valve and the steel cylinder during installation is crucial for safe use. The specific installation and maintenance requirements are as follows: Installation method

After replacing the steel cylinder, when installing the pressure reducing valve, first pay attention to coordination, align the screw thread, and rotate the handwheel in the reverse direction (counterclockwise direction). When rotating, do not use excessive force, and the correct hand feel should be light and free. Otherwise, the thread may not be aligned. Do not forcefully rotate at this time, recalibrate until tightened. If installed properly, gently shake the pressure reducing valve body with your hand to prevent it from shaking or loosening. If installed improperly, even if the handle wheel is tightened, the screws are not suitable, so gently shaking the pressure reducing valve body can cause loose movement.

Leakage detection method for gas pressure reducing valves

To ensure safe use, after the pressure reducing valve is installed, soap water can be applied to the interface for inspection and observation for air leakage. After closing the angle valve of the pressure reducing valve with a pressure indicator, you can smell the odor and observe whether the pointer has changed. The rubber seal at the end of the pressure reducing valve inlet valve is an important component used to prevent air leakage. Every time a liquefied petroleum gas cylinder is replaced, it must be ensured that the seal is not damaged. If deformation or damage occurs, it can be replaced. According to the analysis of past poisoning and explosion accidents, over 60% of them were caused by poor pressure reducing valves, loss or damage of rubber seals, and lessons need to be learned and attention should be paid.

Maintenance method for gas pressure reducing valve

(1) The breathing hole covered on the pressure reducing valve is used to regulate the air volume, ensuring that the pressure reducing valve has a pressure reducing and stabilizing effect and will not be blocked. In the past, due to many users not understanding the above functions of the breathing hole, the pressure reducing valve was very dirty and unwilling to clean. Some people often had accidents when cleaning the pressure reducing valve with cloth because the valve cover was very clean and the breathing hole was blocked by shrapnel when cleaning with cloth. Therefore, if the breathing hole is found to be blocked during the cleaning process, fine iron wire can be used to carefully transmit, but it is necessary to prevent the rubber film inside the pressure reducing valve from being punctured or damaged.

(2) The position of the liquefied petroleum gas cylinder does not meet the requirements, and the liquefied petroleum gas will flow into the pressure reducing valve, causing the rubber seal to dissolve, resulting in a smaller or blocked inlet gap, affecting normal use. In addition, rubber seals are easily damaged components, and long-term use of liquefied petroleum gas can cause pitting and air leakage due to its corrosive effect. Therefore, regular inspections are necessary.